Need help?Do you have a question about the Spacelabs 91369 and is the answer not in the manual?
General| Power Supply | 100-240V AC, 50/60Hz |
|---|---|
| Cardiac Output | Optional |
| Recorder | Optional |
| Networking | Ethernet |
| Display Type | TFT LCD |
Provides a high-level introduction to the 91369 monitor's design and purpose.
Details physical, electrical, environmental, and regulatory specifications of the monitor.
Describes the various optional configurations and features available for the monitor.
Details the specifications and characteristics of the monitor's display screen.
Guides on unpacking, assembling, connecting, and cabling the monitor for first use.
Explains how to connect the monitor to an Ethernet or WLAN network.
Guides on configuring monitor settings, including network, alarms, and user access.
Detailed configuration of network parameters like IP address, subnet, and security.
Describes major internal hardware components and external connectors of the monitor.
Details major PCBAs, power supply, core processor, and internal subsystems.
Explains SDLC interface, PCI subsystem, wireless LAN, display, and modules.
Details interconnect, connector PCBAs, bezel assembly, and PCBA connector information.
Explains boot sequence, normal operation, and parameter module interaction.
Outlines maintenance requirements, test equipment, inspections, and safety precautions.
Details electrical safety testing procedures, definitions, and limits.
Procedures to verify operational functions, self-tests, and touchscreen calibration.
Step-by-step instructions for component replacement and disassembly.
Provides guidelines for cleaning the monitor's exterior and internal components.
Introduces troubleshooting procedures, necessary tools, and problem-solving steps.
Describes system startup, boot menu access, and diagnostic test procedures.
Details accessing error logs and interpreting diagnostic failure messages for fault resolution.
Provides troubleshooting steps for specific system issues like display, network, and power.
Introduces exploded views, parts lists, and essential documentation for servicing.
Lists specific parts that can be replaced in the field, along with their part numbers.
Lists available assembly drawings and schematics for detailed technical reference.
Guides through the Biomed Level menu structure, keys, and serial port configuration.
Explains navigation within the Clinical Level menu, including parameters and settings.
Defines technical terms and acronyms used throughout the manual for clarity.
Details compliance with electromagnetic emission and immunity standards for the monitor.
Provides guidelines for maintaining safe separation distances from RF transmitters to prevent interference.
Lists and describes international and safety symbols used on the product and in the manual.
To Next Page