EasyManua.ls Logo

Spacelabs 91369 - Connections

Spacelabs 91369
150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setup
91369 Service Manual 2-4
While the monitor is operational, a single battery can be exchanged under any of the following conditions
without a loss of patient data:
The monitor is being powered by the external power supply.
The monitor is operating on two batteries, and one charged battery remains connected at all times during
the exchange.
Warning:
Batteries exposed to short circuit, high temperature, or fire may leak, vent, or explode.
Caution:
Follow the manufacturer’s recommended handling procedure. Collect and transport batteries in a
manner that prevents short circuit, compacting, mutilation, or any other abuse that would
compromise the physical integrity.
Connections
Refer to Figure 2-3 for available connections on the monitor’s rear panel. Refer to Figure 2-4 for available
connections on the monitor’s side panel.
Rear Panel
Figure 2-3: Rear panel connections

Equipotential ground post
External power supply input
SDLC port
Alarm relay output
Video output
Serial port