Spark MF910 - User Manual

Page 1 of 34
4G WI-FI
MF910 - 4G WI-FI HOTSPOT
USER MANUAL
Copyright © 2014. All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on errors or
update specifications without prior notice.
Version 1.1 September 2014

Summary

Insert Your Standard Sized SIM Card

Charge Your 4 G Wi-Fi Hotspot

Power Up Your 4 G Wi-Fi Hotspot

Connect Devices by Wi-Fi

Log Into the Web Interface, Modem Login Page

Status Icons - Web Interface

Settings > Network Settings > Dial Up Settings

Settings > Network Selection

Settings > APN

Settings > Wi-Fi Settings > Basic Settings

Settings > Wi-Fi Settings > Advanced Settings

Settings > Device Settings > Account Management

Settings > Device Settings > USIM PIN Management

Settings > Device Settings > Reset

Settings > Firewall > System Security

Troubleshooting

Precautions and Safety Information

RF Safety Information

Information regarding radio frequency safety and exposure.

Spark MF910 Specifications

Power

battery capacity	2300 mAh
voltage	5 V
current resting	100 mA rms

Operating Environment

temperature range	-5ºC to +45ºC
operating time	8 hours
standby time	300 hours

Weight and Dimensions

dimensions	100 x 62.8 x 13.5 mm
weight	120 g