INDEX Page. 4 of 89
Congratulations for choosing the SPE EXPERT 1.5K-FA solid state linear
amplifier.
This amplifier has built-in the power supply (100 – 255 VAC with PFC) and an
Automatic Antenna Tuner capable of matching up to 5:1.
This amplifier is small, powerful and covers all the amateurs bands from 1.8 to 50
MHz including the WARCs bands and, where permitted, can be used on 5 MHz
(60 meters).
It is completely automatic and can be used remotely.
Being only 9.5 Kg. (20.9 Ibs), it is perfect for use in the shack and is superior to all
other amplifiers for DXpeditions.
All operating conditions (frequency, antenna, tuner etc.) are controlled from your
transceiver.
The operator needs to only move the frequency-tuning knob on the transceiver.
Plus, it is possible to connect our amplifier to every transceiver available on the
market, as it is extremely user-friendly, and is a product that is the best in its
class.
IMPORTANT
Read this instruction manual carefully before attempting to operate your new
linear amplifier.
The warranty will be invalidated in the case of non-observance of these
instructions.
Please keep this manual available as it contains important safety and operating
instructions for your SPE EXPERT 1.5K-FA.
The manual is subject to changes and updates, therefore please check for a
possible updated version on the website www.linear-amplifier.com.
The English language version is the official one.
This manual is valid only for the second series starting from the s / n 18xxxx180.
All future software releases can also be used by the Expert 1.5K-FA first series
whose features remain as in the manual rev.1.0.
HOW TO READ THIS MANUAL
This manual is divided into four main parts:
• First part, from chapter 1 to chapter 9.
The characteristics of the amplifier are described, it is essential to read this to
fully understand this amplifier’s potential capabilities that make this product
unique.
• Second part, from chapter 10 to chapter 11.
Programming and startup of the amplifier is described step by step. Some advice
is also given on how to manage various transmission modes.
• Third part, from chapter 12 to chapter 16.
This section details how to interface the amplifier with other equipment.
How to build cables, using USB/RS232 ports for remote control, downloads, etc.
• Fourth part, chapter 20.
Provides all the information for software management.
To Next Page
Loading...
