Need help?Do you have a question about the SPE EXPERT 1.3K-FA and is the answer not in the manual?
Defines warning terms and highlights critical safety notices.
Covers grounding, extension cords, and handling with wet hands.
Guidelines on ventilation, placement, temperature, and liquids.
Operator licensing, child safety, and equipment disposal.
Steps for unpacking the amplifier and checking contents.
Lists all items provided in the amplifier carton.
Detailed description of the front panel layout and functions.
Detailed description of the rear panel layout and functions.
Details the automatic voltage adaptation and power supply.
Explains dual inputs and automatic antenna selection.
Describes ALC for power control, Relay for transmit, and CAT.
How CAT control manages bands, antennas, and tuners.
Explanation of the amplifier's operational states.
Guide for connecting and operating with two transceivers.
Details on using optional band-pass filters for isolation.
Description of the full break-in transmission feature.
How the amplifier controls tunable antennas automatically.
Instructions for configuring single and multiple antennas.
Guidance on using the amplifier on specific frequency bands.
Information on the switching power supply and PFC.
Features and operation of the built-in ATU.
Warnings and methods for bypassing the internal tuner.
Overview of the protection system and alarm types.
How to access and interpret alarm logs and diagnostic messages.
Using keys for navigating and setting options.
Assigning antennas to specific bands and memory banks.
Setting up CAT control for various transceiver brands.
Steps for manually tuning the antenna.
Preliminary operations before powering on the amplifier.
Guidelines for setting appropriate drive levels for different modes.
Details the pinout for the DB15 CAT connector.
Wiring diagrams for Icom, Kenwood, and Yaesu interfaces.
Connections for Band Data and Ten-Tec, Flex-Radio, Elecraft.
Specific setup for Flex-Radio ALC and power limits.
Details on AUX, Remote ON, TX-INH, and PORT connectors.
Usage for tunable antennas and PC remoting via PORT connector.
Wiring for PC control via RS232 and TTL interfaces.
Interfacing the amplifier with a PC via USB or RS232 ports.
Overview of KTerm software for remote operation.
Step-by-step instructions for installing the KTerm software.
Detailed guide on using the KTerm USB remote control application.
Detailed guide on using the KTerm RS232 remote control application.
Configuring unique ID strings for USB device addressing.
Steps for updating the amplifier's internal firmware.
Using RS232 for remote amplifier power control.
Procedure to reset the amplifier to factory defaults.
Details the two-year warranty period and coverage.
Conditions not covered by warranty and required documentation.
Instructions and fields for the repair request form.
To Next Page
General
