Page. 4 of 87
Congratulations for choosing the SPE EXPERT 1.3K-FA solid state linear
amplifier.
It is small, powerful, covers all the amateurs bands from 1.8 to 54 MHz including
WARCs and, where permitted, is able to work on 5 MHz (60 m.) and 70 MHz (4 m.),
completely automatically and remotable.
Being only 7.5 Kg. (16.5 Ibs), it is perfect for use in the shack and is superior to
none for DXpeditions.
All operating conditions (frequency, antenna, tuner etc.) are controlled from your
transceiver.
The operator needs to only move the frequency-tuning knob on the transceiver.
It is possible to connect it to every transceiver available on the market as it is
extremely user-friendly and is a product that is the best in its class.
IMPORTANT
Read this instruction manual carefully before attempting to operate your new
linear amplifier.
The warranty will be invalidated in the case of non-observance of these
instructions.
Please keep this manual available as it contains important safety and operating
instructions for your SPE EXPERT 1.3K-FA.
The manual may be subject to changes and updates therefore please always refer
to the updated version available on the website www.linear-amplifier.com.
The English language version is the official one.
PRECAUTIONS
Explicit definitions
WARNING!
DO NOT disconnect an antenna from the amplifier during transmission; electric shock or
fire is possible.
WARNING!
DO NOT modify the internal wiring of the amplifier. Any modifications will invalidate the
warranty, and may reduce the performance of the linear amplifier or damage it.
To Next Page
Loading...
