Page. 72 of 87
20.3 KTerm_232.exe usage
To start running the KTerm_232.exe application, it is necessary to go back into the
KTerm_Package_1_0 uncompressed folder and select the related filename as shown
in the picture below:
A suggestion is to create a link to the application and place it on the Windows desktop.
A double-click using the left-button of the mouse on the application icon should render a
result as the one shown in the following picture:
The very first time KTerm_232.exe is launched, a notifying pop-up message, like the
one in the picture above, is shown.
This is for just warning the user that there is still no valid RS-232 port being set on the
application itself.
To Next Page
Loading...
