Page. 20 of 87
4.6 Two Possible Sets of Antennas
If one has two different QTH’s, then they would certainly have two different antenna
sets.
In such a case it would be useful to automatically recall data from one set to the other
with no need to redo the configuration and the subsequent ATU matching every time.
The amplifier is equipped with two different memory banks, "Bank A" and "Bank B",
which one can use to store the two different configurations.
This feature is particularly useful if you participate in a DXpedition.
If one of the memory banks is set as your home station, when you will come back, just
recall the proper memory bank.
4.7 With or Without ATU
As the standard configuration, the amplifier comes with the ATU, so as to have the
maximum flexibility of use,
In some cases (perfect antenna system or use of tunable antennas), the ATU may not
be necessary. In order to reduce the initial price one can buy the Expert 1.3K-FA
without the ATU (option).
If necessary, one can install the ATU later.
4.8 Can also be used on 5 MHz and 70 MHz
Where permitted, the Expert 1.3K-FA can provide the full power on 5 MHz (60 m.) and
600 W, with about 10 W input, on 70 MHz (4 m.).
It should be noted that, although permitted, these bands may have power limitation,
follow the laws of the country in which one operates.
On 60 m. the ATU can be used, while on 4 m. the ATU this is always by-passed.
To Next Page
