Page. 57 of 87
20. APPENDIX 1 - REMOTE CONTROL
Overview:
With reference to that described in Section 15. “USE OF THE USB / RS 232 PORTS”,
this appendix contains the following sections:
SW installation
KTerm_USB.exe usage
KTerm_232.exe usage
Firmware update
The host PC must have a minimum of a correctly installed Windows XP operating
system, or a newer release of Microsoft’s operating system such as Windows Vista,
Windows 7, with a typical minimum of RAM and hard disk space.
20.1 SW (Software) installation.
The installation package is contained in a compressed .ZIP archive named
“KTerm_Package_1_0.zip” which requires to be expanded into a work folder and then
processed as described. This package is included in the accessory CD or can be
downloaded from our website at www.linear-amplifier.com .
Once the compressed archive KTerm_Package_1_0.zip has been stored into a work
folder, it must necessarily be expanded; that is all. the files therein contained must be
extracted and properly placed into the host system.
In this example the compressed archive KTerm_Package_1_0.zip has been placed
into a folder named tmp which is, in turn, located on the local disk unit C: as shown in
the picture below:
Next step is the archive expansion. This can be obtained by selecting the filename and
then right-clicking over it. A local menu will appear, with Extract All… this process will
automatically sort unzip and sort the files:
To Next Page
