INDEX Page. 70 of 89
A dialog window will pop up:
Press the Acquire ID string key, marked in the picture above, in order to start the
ID string characters acquisition process across the USB data-link. This is a guided self-
learning procedure.
In case more than one USB communications is linked to the system, directly or
indirectly thru an external USB hub, the following notification pop-up window will be
shown:
In such a case the user should disconnect all other devices except the EXPERT
amplifier and to retry again using the acquisition procedure above described.
In case the user detaches all of the connected devices, including the linear amplifier,
the Term_1.5K_USB.exe acquisition system will notify the user by showing the
following self-explaining pop-up message.
To Next Page
Loading...
