INDEX Page. 80 of 89
A note about the DTR-link behaviour.
Even though this circuit seems to work correctly when driven by software, it could cause
unexpected switching-on of a connected linear amplifier having its rear panel's mains-
switch enabled, when the linked PC re-boots or when an external serial device (e.g. a
USB to serial adaptor...) is physically connected.
The reason for this odd behaviour is related to some uncontrolled OFF-to-ON transitions
of a DTR output line.
So, please, take this unpleasant side effect into account when using this kind of branch
in external links.
To Next Page
Loading...
