32
8.1. CLEANING OUT THE SEAT TUBE
Over time, dirt accumulation in the seat tube may restrict the movement of the framepost.
Check every 50 hours of riding to make sure the inside of the seat tube is clear of dirt buildup.
If your framepost is no longer functioning properly due to impacted dirt in the seat tube, follow
the instructions below to loosen and remove the framepost so you can clean out your seat
tube:
If you don’t have the tools to check/clean the seat tube yourself or if you feel
uncomfortable doing so, please contact your Authorized Specialized Retailer.
Remove the tendon followed by the framepost boot.
Pour water into the frame to moisten the impacted dirt.
Slowly rock the framepost back and forth to loosen the dirt.
Once the framepost is loose, you can remove it and clean all components and seat tube
thoroughly (see section 7.6 CHANGING THE FRAMEPOST for steps on how to remove/
change out the framepost).
8.2. REPLACEMENT PARTS AND ACCESSORIES
Specialized replacement parts, components, and accessories are available through your
Authorized Specialized Retailer.
9. SMALL PARTS & COMPONENTS
PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION
S224900015 FRAMEPOST 1 S180200004 FRONT THRU-AXLE
S224900016 FRAMEPOST 2 S180200005 REAR THRU-AXLE
S224900017 FRAMEPOST 3 S216500003 ICR PORT
S224900018
FRAMEPOST 4 S179900013 ICR GROMMET
S224900019 FRAMEPOST 5 S209900022 MOUNTING POINT PLUGS
S224900020 FRAMEPOST 6 S224700009 SEATPOST CLAMP / BINDER
S224900021 FRAMEPOST 7 S224900025 BOOT KIT
S224900022
FRAMEPOST 8 S226300004 TENDON (49 & 52 cm
FRAMES)
S224900023 FRAMEPOST 9 S226300003 TENDON (54 cm FRAME)
S182600001
REAR DERAILLEUR HANGER S226300002 TENDON (56, 58, 61 cm
FRAMES)
S216900003 CHAINSTAY PROTECTOR S224900026 TENDON SEAL
To Previous Page
Loading...
