Chapter 1 — Library Overview Library Components
September 2022 Site Preperation Guide—Spectra T200, T380, and T680 Library
17
Rear Panel Components
Figure 2 shows the rear panel components of the library.
Note: During normal operation, the following additional components
are present on the rear panel:
For the T200 and T380, a DBA cover is installed over the
drives.
Doors on the T680 rack enclose the back of the library.
Cord locks are installed to prevent the AC power cords from
being disconnected.
A permanent grounding wire is connected to the chassis.
Any bays that do not contain components have covers
installed to maintain proper air circulation through the
library.
Figure 2 Library rear components (T380 with the 2N redundant power supply
option shown).
Drive bay assembly
Empty interface
Library control
module (LCM)
Flex bays (for DBAs
(DBA)
Tool storage
Chambers (3)
(cover removed)
or TBAs)
Empty drive bay
(behind cover,
(cover removed)
Drive
BlueScale Vision
camera connector
Optional interface
module (RIM, QIP, or
BEM)
Power supply
modules (5/12 VDC)
T680 only)
Main AC power cord
connector and switch
(one on each side of
chassis)
controller bay
To Next Page
Loading...
