Spectra Tape Series - Ts11 Xx Technology Tape Drive Specifications

Chapter 4 — Library Specifications Tape Drive and Media Specifications
September 2022 Site Preperation Guide—Spectra T200, T380, and T680 Library
50
TS11xx Technology Tape Drive Specifications
This section provides specifications for the TS11xx technology drives.
Note: The specifications in this section are provided for convenience
only. Refer to the tape drive documentation for the most current
specifications (see TS11xx Technology Drives on page 10).
TS1160 Technology Drive
Parameter Specification
Maximum sustained
transfer rate with JE
media
a, b
a. Assuming a 2.5:1 compression ratio. Compression throughput depends on the type of data.
b. This is a per-drive value.
400 MB/second, native
900 MB/second, compressed
Speed matching range JE: 112 MB/second to 365 MB/second
JD: 112 MB/second to 365 MB/second
JC (TS1150 technology format):
99 MB/second to 303 MB/second
JC (TS1140 technology format):
62 MB/second to 252 MB/second
Average file access time 45 seconds
Encryption capability AES 256-GCM
WORM capability Yes
MTBF 250,000 hours at 100% duty cycle
Uncorrected error rate 1 x 10
–20
bits
Power consumption Read/write: 67 watts maximum
Idle: 35 watts