Spectra Tape Series - Tape Drive and Media Specifications

Chapter 4 — Library Specifications Tape Drive and Media Specifications
September 2022 Site Preperation Guide—Spectra T200, T380, and T680 Library
42
Universal Serial Bus (USB) Support
Spectra Logic supports using the USB ports on the library operator panel
and the LCM for the following:
 Keyboards
 Pointer devices (for example, a computer mouse)
 External Drives (HD, CD, DVD, and Flash) with a USB interface
Spectra Logic does not support using the USB ports for the following:
 Cameras
 Multimedia devices (for example, MP3 players)
NDMP Support
Spectra Logic tape libraries are compatible with local, remote, and three-way
NDMP (Network Data Management Protocol) topologies, where the tape
library is connected to the NDMP data mover host over Fibre Channel.
TAPE DRIVE AND MEDIA SPECIFICATIONS
This section provides the basic specifications for the tape drives and media
supported by the library.
Notes:  SCSI drives have been discontinued and are no longer
available for purchase. If your library includes these drives,
refer to the documentation that accompanied your library
when you received it for specification information.
 The specifications in this section are provided for
convenience only. Refer to the tape drive documentation for
the most current specifications (see LTO Ultrium Tape Drives
on page 10 and TS11xx Technology Drives on page 10).
 The specifications in this section are subject to change
without notice.
Important
The library only recognizes FAT-formatted, not NTFS-formatted, USB devices.