Spectra Tape Series - Page 34

Chapter 4 — Library Specifications Library Specifications
September 2022 Site Preperation Guide—Spectra T200, T380, and T680 Library
34
All values are measured at the AC input and include power supply
efficiency. The values are averages of observed hardware. In general, the
lighter the load on the power supplies, the less efficient they are. The
power supply efficiency in turn affects the power draw of all components.
Component Power Consumption
(watts)
Heat Load, Continuous
(BTU/hour)
Base library
a
a. Base library with one power supply installed; no drives or controllers (RIM or QIP) installed.
115 392
Power supply 33 113
RIM 12 41
G3 QIP 17 58
LTO-4, Fibre Channel  Read/write: 36
 Idle: 17.5
b
Read/write: 123
LTO-4, SCSI  Read/write: 31
 Idle: 16
b
Read/write: 106
LTO-5, Fibre Channel  Read/write: 37
 Idle: 19
b
Read/write: 126
LTO-6, Fibre Channel  Read/write: 28
 Idle: 8
b
b. No cartridge loaded.
Read/write: 95
LTO - 7 Fibre Channel
Full-Height
 Read/write: 31
 Idle: 20
b
Read/write: 106
LTO - 7 Fibre Ch annel or
SAS Half-Height
 Read/write: 31
 Idle: 20
b
Read/write: 106
LTO - 8 Fibre Channel
Full-Height
 Read/write: 40
 Idle: 15
b
Read/write: 136
LTO - 8 Fibre Ch annel or
SAS Half-Height
 Read/write: 43
 Idle: 14
b
Read/write: 164
LTO - 9 Fibre Channel
Full-Height
 Read/write: 35 Read/write: 119
LTO - 9 Fibre Ch annel or
SAS Half-Height
 Read/write: 35 Read/write: 119
TS1140 technology  Read/write: 53
 Idle: 30
b
Read/write: 181
TS1150 technology  Read/write: 55
 Idle: 38
b
Read/write: 188
TS1155 technology  Read/write: 60
 Idle: 19
b
Read/write: 205
TS1160 technology  Read/write: 67
 Idle: 35
b
Read/write: 229