8. PIN Code: The WPS PIN code which clients use to connect with the WiFi Router.
9. In the WPS Method field, select Push Button or Client PIN code. If you select Push Button,
go to step 10. If you select Client PIN code, go to step 11.
10. To set up WPS using the WiFi Router’s WPS button, follow these steps:
a) Click Start or press the WPS button found at the rear of the WiFi Router.
b) Press the WPS button on your wireless device. This is normally identified by the WPS
logo.
11. To set up WPS using the Client’s PIN code, follow these steps:
a) Locate the WPS PIN code in wireless device’s in Web GUI.
b) Key in the Client PIN code on the text box.
12. Click Start.
16
To Next Page
Loading...
