Spectrum 802.11ac Wave 2 User Manual

1.3 Hardware Features
Before setup please take a moment to become familiar with the front Panel and Rear Panel
of your WiFi Router. Pay particular attention to the LED on the front panel. You should know
the surface structure of your WiFi Router only.
1.3.1 Front Panel
The WiFi Router front and back panels feature the status LED and buttons as shown in the
following figure
Front panel LED status
·
Off:
·
Blue Flashing (0.4 second intervals):
·
Blue Pulsing 1 second intervals:
·
Blue solid:
·
Red Flashing:
·
Red and Blue alternate Pulsing:
·
Red solid:
·
LED on front of device will dim to low (65%) when there is no settings activity or
connectivity issues for 120 hours.
·
If any settings are changed or connectivity issues occur LEDs will return to normal (100%)
brightness.
4
Figure 2. WiFi Router front view
Device off.
Booting up.
Connecting to Internet.
Connected to Internet.
Connectivity issues (no Internet connection).
Updating firmware (or any scenario where
device must not be restarted).
Critical issues (hardware or otherwise).

Spectrum 802.11ac Wave 2 Specifications

General

Brand	Spectrum
Model	802.11ac Wave 2
Category	Network Router
Language	English