46
2.4.1.1.7 NAT Pass Through
NAT Pass Through lets a Virtual Private Network (VPN) connection pass through the WiFi
Router to the network server.
Steps to set up NAT Pass Through:
1. To configure NAT Pass Through settings, go to Advanced > Network > WAN > NAT Pass
Through.
2. PPTP Passthrough:
3. L2TP Passthrough:
4. IPSec Passthrough:
5. SSL Passthrough:
6. RTSP Passthrough:
Enable or disable. Point-to-Point Tunneling Protocol (PPTP) is a
method for implementing virtual private networks.
Enable or disable. In computer networking, Layer 2 Tunneling Protocol
(L2TP) is a tunneling protocol used to support virtual private
networks (VPNs) or as part of the delivery of services by ISPs. It does
not provide any encryption or confidentiality by itself.
Enable or disable. Internet Protocol Security (IPsec) is a protocol suite
for securing Internet Protocol (IP) communications by authenticating
and encrypting each IP packet of a communication session.
Secure Sockets Layer(SSL) is cryptographic protocols that provide
communications security over a computer network.
Enable or disable. The Real Time Streaming Protocol (RTSP) is a
network control protocol designed for use in entertainment and
communications systems to control streaming media servers.
To Next Page
Loading...
Need help?
General
