·
Username / Password Auth. Only: Yes requires only username and password for
authentication, No also requires authentication
certificate.
·
Extra HMAC Authorization: If enabled, a tls_auth key will be used on the server.
Every client must also have the key.
·
VPN Subnet / Subnet Mask: VPN subnet and subnet mask settings.
·
Poll Interval: The interval time for crontab of VPN server starting.
·
Push LAN to Clients: Push routes to the client to allow it to reach other
private subnets behind the server.
·
All traffic through VPN: If enabled, this directive will configure all clients to
redirect their default network gateway through the
VPN, causing all IP traffic such as web browsing and
DNS lookups to go through the VPN.
·
Respond to DNS: Push DNS to clients.
·
Encryption Cipher: Select a cryptographic method. This configure item
must be copied to the client configure file as well.
·
Compression: Enable compression on the VPN link. If this function is
enable here, in the client configure administrator also
should enable it.
·
TLS Renegotiation Time: After a period of time, authentication is required again.
·
Manage Client-Specific Options: To assign specific IP addresses to specific clients or if
a connecting client has a private subnet behind it that
should also have VPN access, enable this option.
·
Click Apply.
82
To Next Page
Loading...
Need help?
General
