84
5. Enable Default Route:
6. Description:
7. VPN Server:
8. Username:
9. Password:
10. PPTP Options:
11. When done, click Confirm.
Check [Yes] to use default route acquiring from VPN Server.
Check [No] to use general default route.
Enter a description for reference.
VPN Server IP address or URL.
VPN authentication username.
VPN authentication password.
PPTP Encryption method. Select Auto for automatic Microsoft
Point-to-Point Encryption (MPPE) and select No Encryption to
disable MPPE. Select MPPE 40 for 40-bit MPPE with PPTP Server
and select MPPE 128 for 128-bit MPPE with PPTP Server.
To Next Page
Loading...
