Spectrum 802.11ac Wave 2 User Manual

88
2.4.3.2.3 Client ACL
Client ACL can forbid the client from accessing to the WiFi Router. The client in the Client
ACL List can’t visit the resource of WiFi Router and the internet.
Steps to set up Client ACL:
1. From the navigation panel, go to Advanced> Security> IPv4 Firewall> Client ACL.
2. Enable Client ACL: Enable or disable Client ACL function.
3. Client: MAC address of LAN-side devices.
4. Add/Delete: Click or to add/delete the profile.
5. When done, click Apply.

Spectrum 802.11ac Wave 2 Specifications

General

Brand	Spectrum
Model	802.11ac Wave 2
Category	Network Router
Language	English