9
E-DOC-CTC-20050705-0001 v1.0
Chapter 2
Installing your SpeedTouch™
2.3 Installing your SpeedTouch™ in Microsoft
Windows
To install and connect
your SpeedTouch™
Proceed as follows:
1 Make sure you have all the required equipment and information ready at
hand. See “2.1 Pre-installation Checklist” on page 6.
2 Insert the Setup CD into your computer's CD-ROM or DVD-ROM drive.
3 If the installation program does not start automatically, double-click the file
setup.exe on the Setup CD.
4 Select the language in which you wish to see the installation instructions.
5 Follow the installation instructions on your screen.
If you inserted the Setup CD into your computer during previous sessions
without installing the SpeedTouch™, the SpeedTouch™ CD Menu window
apprears diectly. In that case, you must click (Re-)install my SpeedTouch
330 in the SpeedTouch™ CD Menu to start the installation.
To Next Page
Loading...