Need help?Do you have a question about the Speedtouch 330 and is the answer not in the manual?
General| Brand | Speedtouch |
|---|---|
| Model | 330 |
| Category | Modem |
| Language | English |
Explains symbols used in the guide for notes, tips, and cautions.
Clarifies how 'SpeedTouch™ 330' is referred to in the guide.
Provides contact details for document suggestions and information on software updates.
Explains the USB power source and the function of indicator lights.
Illustrates the physical connection setup of the SpeedTouch™ modem.
Summarizes the three main steps: checking requirements, software installation, and connecting to the internet.
Lists general items, ADSL requirements, and splitter function needed before installation.
Specifies minimum hardware requirements for the computer, including CD-ROM drive and USB port.
Lists minimum system requirements for Microsoft Windows and Mac OS X platforms.
Lists the essential connection details required from the ISP for setup.
Describes the Setup CD and its included software wizards for installation and setup.
Emphasizes not to connect cables until prompted during the software installation procedure.
Guides users to OS-specific installation sections for Microsoft Windows and Mac OS X.
Provides step-by-step instructions for installing the SpeedTouch™ on Microsoft Windows.
Details installation parts and notes on OS version differences for Mac OS X.
Outlines the procedure for installing the SpeedTouch™ software on Mac OS X.
Provides step-by-step instructions for installing the SpeedTouch™ hardware on Mac OS X.
Details the steps required for configuring a PPP connection on Mac OS X.
Describes the two supported connection methods: PPP and RFC1483 Bridged.
Guides users to OS-specific sections for connecting/disconnecting in Windows and Mac OS X.
Provides instructions on how to connect and disconnect from the Internet using SpeedTouch™ in Windows.
Explains how to verify the internet connection status in Windows via the taskbar icon.
Details the procedure for connecting and disconnecting from the Internet in Mac OS X.
Introduces the chapter's content on identifying and correcting problems and updating software.
Explains how to check the SpeedTouch™ status using its indicator lights and their meanings.
Provides troubleshooting steps if the SpeedTouch™ USB driver installation fails.
Offers solutions for issues preventing connection to the Internet.
Suggests actions for persistent problems, including reinstallation and contacting support.
Explains the difference between isochronous and bulk transfer modes for USB connections.
Lists potential warnings from the Diagnostics tool and their explanations and solutions.
Provides solutions for not being able to view the SpeedTouch™ documentation on the CD.
Explains how to handle security warnings related to active content in Internet Explorer when viewing documentation.
Guides users on where to find software updates via the web or Setup CD.
Provides step-by-step instructions for updating the SpeedTouch™ software using the internet.
Explains how to locate the SpeedTouch™ Diagnostics icon and the meaning of its status colours.
Explains how to use the SpeedTouch™ Diagnostics program to check internet connection status.
Describes how to open the SpeedTouch™ Diagnostics window in Microsoft Windows.
Explains the information presented in the Windows SpeedTouch™ Diagnostics window, including status and throughput.
Describes how to open the SpeedTouch™ Diagnostics window in Mac OS X.
Explains the data and throughput metrics in the Mac OS X SpeedTouch™ Diagnostics window.
Lists and explains the functionality of the buttons within the Diagnostics tool.
Outlines the process of removing the SpeedTouch™, involving both physical disconnection and software uninstallation.
Provides step-by-step instructions for uninstalling the SpeedTouch™ software from a Microsoft Windows system.
Details the procedure for removing the SpeedTouch™ software from a Mac OS X computer.
To Next Page