13
E-DOC-CTC-20050705-0001 v1.0
Chapter 2
Installing your SpeedTouch™
9 Click the Modem tab.
10 Select SpeedTouch™ USB Modem in the Modem list and leave the other
modem settings unchanged.
11 Run through all tabs again to check whether all configurations are correctly
done as described above and click Apply Now to apply the settings.
Your SpeedTouch™ connection is installed and ready for use. The SpeedTouch™ is
now prepared for connecting you to the Internet (See “3 Connecting to and
Disconnecting from the Internet” on page 15).
To prevent further changes you can click the lock icon to secure your
settings. From then on, changes are only possible after providing the
Administrator password.
To Next Page
Loading...