Speedtouch 330 - The Speedtouch Setup CD

14
E-DOC-CTC-20050705-0001 v1.0
Chapter 2
Installing your SpeedTouch™
2.5 The SpeedTouch™ Setup CD
The SpeedTouch™
Setup CD
If you insert the Setup CD into a Microsoft Windows PC or Mac OS X computer, an
intuitive CD Menu guides you through the features and contents of the Setup CD and
allows you to easily browse for user documentation, SpeedTouch™ system software,
service templates, SNMP MIBs, etc.
SpeedTouch™
CD Menu
The way in which you open the SpeedTouch™ CD Menu depends on the operating
system you are using:
 Microsoft Windows: the SpeedTouch™ CD Menu appears automatically each
time you insert the Setup CD after initial installation.
 Mac OS x: double-click the file Menu on the Setup CD to open the
SpeedTouch™ CD Menu.
Documentation and
Help
You can click Documentation and Help in the SpeedTouch™ CD Menu to:
 View documentation on the SpeedTouch™ 330.
 Visit the SpeedTouch DSL Site.
Check for Software
Updates
You can click Check for Software Updates in the SpeedTouch™ CD Menu to go to
Thomson’s SpeedTouch Web site, where you will see a list of available software
updates for your SpeedTouch™.
(Re-)install my
SpeedTouch 330
If necessary, click (Re-)install my SpeedTouch in the SpeedTouch™ CD Menu to
reinstall your SpeedTouch 330.
The SpeedTouch Quick Install Wizard opens. For more information, see also “ Setup
CD and install wizards” on page 8.
View CD Contents You can click View CD Contents in the SpeedTouch™ CD Menu to view all files and
folders of the SpeedTouch™
Setup CD.
Remove my
SpeedTouch 330
(Mac OS X only)
You can click Remove my SpeedTouch in the SpeedTouch™ CD Menu to remove the
SpeedTouch™ software from your Mac OS X computer. See also “6 Removing the
SpeedTouch™” on page 33.