8
E-DOC-CTC-20050705-0001 v1.0
Chapter 2
Installing your SpeedTouch™
2.2 Installing and Connecting your SpeedTouch™
Setup CD and
install wizards
To install your SpeedTouch™ and connect to the Internet, you will use the Setup CD
which is included in your ADSL package. The Setup CD contains two “install
wizards”, small software programs which will help you to install and set up your
SpeedTouch™.
Connecting the cables:
wait!
During the installation procedure, you will obviously have to connect two cables: the
DSL cable to your telephone outlet or ADSL splitter and the USB cable to your
computer. It is important, however, that you do not connect these cables until you
are prompted to do so at the corresponding step in the installation procedure.
Operating system The installation procedure depends on the operating system you are using:
Microsoft Windows, see “2.3 Installing your SpeedTouch™ in Microsoft
Windows” on page 9.
Mac OS X, see “2.4 Installing your SpeedTouch™ in Mac OS X” on page 10.
To Next Page
Loading...