Spektrum DX6 User Manual

10
SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL
EN


BINDING
Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter.
You must bind the AR610 receiver to your transmitter before it will operate.
Binding Using the Receiver and Receiver Battery
Binding Using the Receiver and ESC
C
D
F
C
D
F
CLEAR
BACK
3 MODEL TYPES Wirel ess Trainer VOICE ALERTS
6-CHANNEL DSMX® TEL EMETRY SYSTEM
CLEAR
BACK
3 MODEL TYPES Wirel ess Trainer VOICE ALERTS
6-CHANNEL DSMX® TEL EMETRY SYSTEM
C
D
F
C
D
F
CLEAR
BACK
3 MODEL TYPES Wirel ess Trainer VOICE ALERTS
6-CHANNEL DSMX® TEL EMETRY SYSTEM
CLEAR
BACK
3 MODEL TYPES Wirel ess Trainer VOICE ALERTS
6-CHANNEL DSMX® TEL EMETRY SYSTEM
C
D
F
C
D
F
CLEAR
BACK
3 MODEL TYPES Wirel ess Trainer VOICE ALERTS
6-CHANNEL DSMX® TEL EMETRY SYSTEM
CLEAR
BACK
3 MODEL TYPES Wirel ess Trainer VOICE ALERTS
6-CHANNEL DSMX® TEL EMETRY SYSTEM
C
D
F
C
D
F
CLEAR
BACK
3 MODEL TYPES Wirel ess Trainer VOICE ALERTS
6-CHANNEL DSMX® TEL EMETRY SYSTEM
CLEAR
BACK
3 MODEL TYPES Wirel ess Trainer VOICE ALERTS
6-CHANNEL DSMX® TEL EMETRY SYSTEM
1. Lower throttle to the lowest position and make sure the
transmitter is powered off.
2. Insert the bind plug into the BIND/DATA port.
3. Insert the receiver battery into ANY open port. The receiver’s
LED will flash when the receiver is ready to bind.
4. While pressing the Bind button, power on the
transmitter.
5. Release the Bind button after the receiver has stopped
flashing rapidly, once the receiver’s LED stays illuminated; this
indicates the receiver is bound to the transmitter. The screen
also provides binding information.
6. Remove the bind plug from the receiver.
1. Lower the throttle to the lowest position and make sure the
transmitter is powered off.
2. Insert the bind plug into the BIND/DATA port.
3.InserttheESCplugintotheTHROport.
4. Connect the battery to ESC and turn on the ESC switch,
if available. The receiver’s LED will flash rapidly when the
receiver is ready to bind.
5. While pressing the Bind button, power on the
transmitter.
6. Release the Bind button after the receiver’s LED stays illumi-
nated. This indicates the receiver is bound to the transmitter.
The transmitter screen also provides binding information.
7. Remove the bind plug from the receiver.
1
1
4
5
2
2
5
6
3
3 4
6
7

Spektrum DX6 Specifications

General

Interface	RF Wireless
Input type	-
Product color	Black
Built-in display	Yes
Maximum range	- m
Channels quantity	6 channels
Number of devices supported	250
Battery type	AA
Rechargeable	No
Number of batteries supported	4

Weight and Dimensions

Weight	- g