10
41&,536.%9Jt3"%*0130(3"..*/((6*%&
*/45"--*/(5)&53"/4.*55&3#"55&3*&4
DX6i systems that are included in some Ready-To-Fly aircraft (like the E-flite Blade 400) require 4 AA batteries
while DX6i systems purchased separately include rechargeable NiMH batteries and an overnight charger.
*/45"--*/(5)&#"55&3*&4
For transmitters that require 4 AA batteries:
Remove the battery door and install 4 AA batteries, noting the polarity of each corresponds with the diagram in the
battery holder. Replace the battery door.
/PUF: Optional NiCd or NiMH 1.2 volt AA rechargeable batteries can also be used. A charge jack
is located on the left side of the transmitter for convenient recharging.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
