61
41&,536.%9Jt3"%*0130(3"..*/((6*%&
Press the roller to access the Model Select function.
Reduce photo to 13.5%
MODEL SELECT
MODEL 6
MUSTANG
List
Rotate the roller to display the desired model that you wish to select. Ten models are available.
When the desired model is displayed press the roller to select the displayed model memory. DOWNLOAD... will
appear for several seconds and the transmitter will beep indicating the model has been changed.
503&563/505)&."*/4$3&&/
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
Alternatively highlighting MAIN with the roller and pressing the roller will return to the MAIN screen.
Turning the transmitter off then back on will also return to the main screen.
.0%&-."5$)
The DX6i features patented ModelMatch™ technology that prevents operating a model using the wrong memory.
This feature can prevent stripped servo gears, broken linkages and even a crash due to trying to operate/ fly a
model using the wrong memory.
)08.0%&-."5$)803,4
Each individual model memory has its own embedded code that is transferred to the receiver during binding. The
receiver actually learns the code for the specific model memory that has been selected during binding and, when
bound, will only operate when that model memory is selected. If a different (non-matching) model memory is
selected, the receiver simply won’t connect. This feature prevents trying to operate/ fly a model using the wrong
model memory. The receiver can be re-programmed to operate with any other model memory by simply re-binding
with the transmitter programmed to the desired model memory.
/PUF: If the receiver is turned on and the matching model memory is not selected, the system will
not connect. Either select the matching model memory or rebind the receiver in the current model
memory to resume operation.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
