132
41&,536.%9Jt3"%*0130(3"..*/((6*%&
(&/&3"-*/'03."5*0/
FCC Information
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This product contains a radio transmitter with wireless technology which has been tested and found to
be compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz
frequency range.
Servo Precautions
t %POPUMVCSJDBUFTFSWPHFBSTPSNPUPST
t %POPUPWFSMPBESFUSBDUTFSWPTEVSJOHSFUSBDUFEPSFYUFOEFEDPOEJUJPOT.BLFTVSFUIFZBSFBCMFUPUSBWFM
their full deflection. Overloading or stalling a servo can cause excessive current drain.
t .BLFTVSFBMMTFSWPTNPWFGSFFMZUISPVHIUIFJSSPUBUJPOTBOEOPMJOLBHFTIBOHVQPSCJOE"CJOEJOH
control linkage can cause a servo to draw excessive current. A stalled servo can drain a battery pack in a
matter of minutes.
t $PSSFDUBOZDPOUSPMTVSGBDFiCV[[wPSinVUUFSwBTTPPOBTJUJTOPUJDFEJOnJHIUBTUIJTDPOEJUJPO
can destroy the feedback potentiometer in the servo. It may be extremely dangerous to ignore such
“buzz” or “flutter.”
t 6TFUIFTVQQMJFESVCCFSHSPNNFUTBOECSBTTTFSWPFZFMFUTXIFONPVOUJOHZPVSTFSWPT%POPUPWFS
tighten the servo mounting screws, as this negates the dampening effect of the rubber grommets.
t &OTVSFUIFTFSWPIPSOJTTFDVSFMZGBTUFOFEUPUIFTFSWP6TFPOMZUIFTFSWPBSNTDSFXTQSPWJEFEUIF
size is different from other manufacturers.
t %JTDPOUJOVFUPVTFTFSWPBSNTXIFOUIFZCFDPNFiZFMMPXFEwPSEJTDPMPSFE4VDITFSWPBSNTNBZCF
brittle and can snap at any time, possibly causing the aircraft to crash.
t $IFDLBMMSFMBUFENPVOUJOHTDSFXTBOEMJOLBHFTGSFRVFOUMZ"JSDSBGUPGUFOWJCSBUFDBVTJOHMJOLBHFTBOE
screws to loosen.