Spektrum DX6I - Radio System Operation and Safety; Range Testing and Binding

17 41&,536.%9Jt3"%*0130(3"..*/((6*%&
)08503"/(&5&455)&%9*
Before each flying session, and especially with a new model, it is important to perform a range check. The DX6i
incorporates a range testing system which, when placed in the RANGE CHECK program and the trainer switch is
activated and held, reduces the output power, allowing a range check.
Reduce photo to 13.5%
RANGE CHECK
CHECK INH
List
3"/(&5&45*/(5)&%9*
1. With the model resting on the ground, stand 30 paces (approx. 90 feet) away from the model.
2. Face the model with the transmitter in your normal flying position. Place the transmitter in the range test
screen (see page 51 or 98) and pull and hold the trainer switch on the top of the transmitter. This causes
reduced power output from the transmitter.
3. You should have total control of the model with the trainer switch pulled at 30 paces (90 feet).
4. If control issues exist, call the Horizon Product Support Team at 1-877-504-0233 for further assistance.
Pull and hold the trainer switch
30 paces (90 feet)