105
41&,536.%9Jt3"%*0130(3"..*/((6*%&
"%+645-*45
The adjust list contains programming features that are commonly used to adjust flight characteristics. These
functions included Dual Rate and Expo, Travel Adjust, Pitch and Throttle Curves, Mixes, etc. The Adjust List is
accessible from the main screen by simply pressing the roller or is available through the SETUP LIST.
D/R&EXPO
AILE 1 100% INH%
ELEV 1 100% INH%
RUDD 1 100% INH%
List
SWASH MIX
AILE +60
ELEV +60
PITCH +60
List
MODEL SELECT
MODEL 1
BLADE 400
List
PITC CUR
NORM + POS 3
STUNT
HOLD 50.0%
List
SUB TRIM
THRO 0
ELEV 0
GYRO 0
AILE 0
RUDD 0
PITC 0
List
MIX 2
THRO≥ THRO ACT
RATE D 0% U 0%
SW ON TRIM INH
List
TRAVEL ADJ
THRO+100%
ELEV+100%
GYRO+100%
AILE+100%
RUDD+100%
PITC+100%
List
MIX 1
THRO≥ THRO ACT
RATE D 0% U 0%
SW ON TRIM INH
List
GYRO
RATE SW-GYRO
0: 50.0%
1: 50.0%
List
REVO MIX
NORM+ STUNT
UP 0% UP 0%
DN 0% DN 0%
List
SETUP LIST
MODEL TYPE
Main
THRO CUR
NORM + POS 3
STUNT
HOLD 50.0%
List
Dual Rate and Exponential (Page 109) Swash Mix (Page 123)
Model Select (Page 107) Pitch Curve (Page 121)
Sub Trim (Page 113) Mix 2 (Page 125)
Travel Adjust (Page 111) Mix 1 (Page 125)
Gyro (Page 115)
Setup List (Page 131)
Throttle Curve (Page 118)
Revo Mix (Page 130)