5
TECHNICAL DATA
MATERIALS OF CONSTRUCTION
• Valve Body: 316L stainless steel
• Stem: 316L stainless steel
• Seat: EPDM / Viton / PTFE (all FDA approved)
• O-rings: EPDM / Viton (all FDA approved)
• Bonnet: 304 stainless steel
• Actuator parts: 304 stainless steel
SEAL TYPES
• Non-replaceable over-molded EPDM
• Non-replaceable over-molded Viton
• Replaceable PTFE
SURFACE FINISH
• 32Ra or less on product contact surfaces
APPROVALS
• 3-A per 53-06
• Materials FDA approved
To Next Page
Loading...