IM-P323-32
CTLS Issue 5
42
SX80 and SX90 Quickstart Guide
4.1 Operation
By default the following settings can be made in Operator Level 1
To select Auto, Manual or OFF mode
In the HOME display:
Press and hold the and buttons together for more than 1 second
Press the button to select Manual (man), O (O) and Auto(Auto).
In Manual (or OFF) mode, MAN will be lit. When in Manual press the
or buttons to decrease or increase output power.
Alarm indication
The red ALM beacon will ash. A scrolling text message will describe the
source of the alarm. Any output attached to the alarm will operate (de-
energise) by default.
To acknowledge the alarm:
Press the and (ACK) buttons together.
By default, alarms are congured as manual latching and can only be
reset when the alarm conditions are no longer present.
4. Commissioning
To Next Page
Loading...
