IM-P323-32
CTLS Issue 5
4
SX80 and SX90 Quickstart Guide
Safe operation of this product can only be guaranteed if it is properly
installed, commissioned, used and maintained by qualified
personnel (see Section 1.11) in compliance with the operating
instructions. General installation and safety instructions for pipeline
and plant construction, as well as the proper use of tools and safety
equipment must also be complied with.
Safety and EMC protection can seriously be impaired if the unit is
not used in the manner specified. It is the responsibility of the
installer to ensure the safety and EMC of the installation.
Safety
This instrument complies with the European Low Voltage Directive
73/23/EEC, by the application of the safety standard EN 61010.
Unpacking and storage
If on receipt, the packing or unit is damaged do not install but
contact your supplier. If the unit is being stored before use, protect
it from humidity and dust within an ambient temperature range of
-30ºC to +75ºC.
Electrostatic discharge precautions
Always observe all electrostatic precautions before handling the
unit.
Service and repair
This instrument has no user serviceable parts. Contact your supplier
for repair.
1. Safety information
To Next Page
Loading...
Need help?
General
