Tech-X Flex™ Base Unit User Guide Issue 1
1: Introduction 1-17
Intro
Wi-Fi
10/100
System
IP/Video
Specs
Figure 1-10 Removing the battery pack
3. Using the two screws at the base of the battery pack unit, remove the old battery from the plastic
holder and replace with the new battery,
4. Carefully reinstall the battery pack and screws.
NOTE: Do not overtighten the screws, which could cause the battery pack cover to crack.
1.5 Technical support
If you need product assistance or want to report problems with the product or the documentation, please
contact us.
Client Services
Spirent Communications
20324 Seneca Meadows Parkway
Germantown, MD 20876
USA
Phone: +1 301.444.2400
or +1 800.321.0780 (USA)
Fax: +1 301.444.1010
To Next Page
Loading...
