Tech-X Flex™ Base Unit User Guide Issue 1
1: Introduction 1-1
1: Introduction
This section provides an overview of the Tech-X Flex product and includes the following information:
• Documentation notes on page 1-1 - Describes this document and the terminology within.
• Product introduction on page 1-2 - Describes the physical unit and includes a high-level overview of
system features and capabilities.
• General product handling and operation on page 1-9 - Describes basic procedures for handling and
operating the unit.
• Maintenance on page 1-15 - Describes maintenance requirements and procedures for the unit.
• Technical support on page 1-17 - Provides contact information.
1.1 Documentation notes
1.1.1 Document purpose and scope
This document is intended for field technicians and other personnel who use the product for circuit and
network testing. Depending upon your licensing agreement, your unit may not include all the
functionality presented in this document. For more information about licensing arrangements, please
contact a Spirent account manager.
1.1.2 Definitions of terms and acronyms
For clarity, the following terms are defined:
To Next Page
Loading...