Spirent Tech-X Flex - Setup - Web Browser; IP Video Testing

Tech-X Flex™ Base Unit User Guide Issue 1
5: IP and Video Testing 5-7
Intro
Wi-Fi
10/100
System
IP/Video
Specs
5.5.1 Setup - Web Browser
5.6 IP Video testing
IP video testing support includes:
• Subjective quality assessment of viewer experience
• Comprehensive statistics on multimedia transport streams
• Video channel change times
Video testing is supported on IP multicast streams using the MPEG codec. During testing, the unit joins
the stream and emulates an IPTV subscriber, providing a comprehensive view of the subscriber
experience.
NOTE: Depending upon the test interface, passive testing of video quality for unicast and multicast
streams may also be available.
Specific video functions include:
Table 5-5 Web Browser - Setup parameters
Parameters Description
URL Target address of the web page to load, either a dotted IP address or a URL if a
DNS is available. For example:
208.22.58.142
www.google.com
Note the following:
• When entering a URL, case is unimportant because all characters are
converted to lower case when the browser is launched.
• The unit remembers the recent addresses you entered.