Tech-X Flex™ Base Unit User Guide Issue 1
3: 10/100 Testing Menu 3-3
Intro
Wi-Fi
10/100
System
IP/Video
Specs
3.4 IP Network Setup
IP Network Setup allows you to assign IP routing information to the unit in order to perform IP-based
testing. This function operates similarly to other interfaces; however, note that when launched from the
10/100 menu, the assigned IP information applies to the 10/100 interface/connection only.
For more information on IP Network Setup parameters and results, see IP Network Setup on page 5-1.
NOTE: The unit must be connected to a suitable access device before attempting IP Network setup
(see 10/100 testing diagram on page 3-2).
3.5 Ping
Ping testing over the 10/100 interface is similar to other interfaces. For more information, see Ping on
page 5-4.
3.6 Traceroute
Traceroute testing over the 10/100 interface is similar to other interfaces. For more information, see
Traceroute on page 5-5.
3.7 Web Browser
NOTE: The web browser is a purchasable option. Please contact Spirent for more information.
Use of the web browser over the 10/100 interface is similar to other interfaces. For more information, see
Web Browser on page 5-6.
3.8 IP Video Tests
NOTE: Video testing is a purchasable option. Please contact Spirent for more information.
Active IP video testing on the 10/100 interface is similar to other interfaces. For more information, see IP
Video testing on page 5-7.
To Next Page
Loading...
