Attach the dock to the mount
Once you’ve chosen your mount you need to attach the dock
to it. You do this by using the screw on the back of the dock.
The dock attaches in the same way regardless of which
mount you’re using.
1. Loosen the screw on the back of the dock.
2. Insert the ball joint on your chosen mount into the grip
on the back of the dock. You need to insert the ball
through the hole in the screw.
3. Fasten the screw to secure the mount.
Important! Go to the Safety information for more information
about how to install the mounts safely.
To Next Page
Loading...
