Organize the cables
After you’ve set Car Thing up and mounted it, you can use the
cable organizers to arrange the cables. These let you arrange
the cables in a neat and tidy way to keep them away from
important functions in the car.
Place the cable organizers
1. Decide on appropriate spots to place the cable
organizers. This should be in spots that places the
cables out of the way from important functions in the
car.
2. Clean the surface where you will put the cable
organizers.
3. Peel off the protective cover from the back of the cable
organizers.
4. Place the cable organizers in your chosen spots.
Insert cables
1. Open the cable organizers along the center.
2. Place the cables in the opening.
Tip! You can also use the velcro band from around the aux
cable to help organize the cables.
Important! Go to the Safety information for more information
about how to install the mounts safely.
To Next Page
Loading...
