Sprada Filter - POWER INTERRUPTIONS

SPRADA filter manual changes 4/16/07 11:25 AM Page 13
Com
posite
C M Y CM MY CY CMY K
5.5 e) Rotate the P-button to select from 4, 6, 8 or 10 cups. The display will now show
GRINDING AUTO <8 c >.
5.5 f) Push the P-button. The display will show TASTE AUTO <MEDIUM >.
5.5 g) Rotate the P-button to select from MILD, MEDIUM, STRONG. The display will show
TASTE AUTO <STRONG >.
5.5 h) Push the P-button to confirm the new settings. The display will immediately revert to
the actual setting: “3:16 AM / 8c MILD”.
• NOTE: To check the Auto-Setting, push the A-button (M) the button will illuminate green and
the display will show: 6:20 AM / 8 c STRONG.
• Push the A-button again (M), the green illumination will disappear and the display will revert to
the actual real-time and grinder settings.
6.0 POWER INTERRUPTIONS:
• NOTE: If you have a power interruption or if you unplug the machine for less than 2 to 3
minutes, the display and all set functions will remain. If the machine was set to AUTO, it will still
grind and brew coffee at the pre-set time. If the machine was brewing coffee, it will continue
brewing until the water tank is empty.
• If the machine is unplugged or if you have a power interruption for more than 2 to 3 minutes,
the time function will be lost. If the coffee maker was set to AUTO, no coffee will be ground and
the filter will still sit underneath the grinder. If the machine was brewing coffee before power
interruption, it will not continue brewing.
• If the power comes back on again, the LCD display
(K) will show TIME<AM>. You must set
the time again, as from 5.2 above.
• NOTE: Your personal grinding settings and the Auto-ON time will maintained.
12