SPRADA filter manual changes 4/16/07 11:25 AM Page 23
Com
posite
C M Y CM MY CY CMY K
15.0 FAQ’S (Technical questions):
Q1. I accidentally locked the filter holder underneath the grinder. What do I do?
A. Push the manual filter holder release button
(Fig. 14).
Q2. There is no coffee coming out of the grinder. It seems as though the coffee is
completely clogged inside the grinder. What do I do?
A. Please follow the steps outlined in chapter 13.0.
Q3. Can the grinder run without beans in the bean container?
A. Yes.
Q4. Can I have a different grinding setting for the current and the programmed mode?
A. Yes! (see chapter 5.4)
Q5. How long does the machine keep the grinding and brewing settings?
A. See chapter 5.4. The programmed setting is activated only when you push the “A” button
(Fig. 1, M) and the green auto light turns on.
Q6. How do I know if the display shows the current or the programmed setting?
A. In the program mode the “A” button is illuminated green.
Q7. Can I change any settings while the grinder is running?
A. No. The red On/Off light or the green Auto light has to be “Off ” to change the grinder settings.
22
To Next Page
Loading...
