SPRADA filter manual changes 4/16/07 11:25 AM Page 25
Com
posite
C M Y CM MY CY CMY K
16.0 FAQ’S (Coffee questions):
Q1. How much coffee should I use?
A. The grinder grinds between approximately 6 seconds (setting “4, mild”) and 30 seconds (setting
“10, strong”). The maximum amount of coffee will be ground in the setting “10, Strong” with the
fineness selector in the coarsest position.
EXAMPLE: For 10 cups of coffee: fill the water container with the maximum amount of water.
Set the grinder to 10 cups, the strength indicator to mild, and the fineness selector to fine.
• IF THE COFFEE IS TOO STRONG; change the grind amount indicator to 8, the strength indicator
to medium, and continue to use the same amount of water.
• IF THE COFFEE IS NOT STRONG ENOUGH; leave the grind indicator at 10, change the strength
indicator to strong, and set the fineness selector to the coarsest position (largest dot). If the
coffee is still not strong enough, use a little less water.
Q2. I want a full pot of coffee at 8:00 AM.
What time should I program the grinder to start?
A. Set the timer 15 minutes earlier (this case 7:45 AM)
Q3. Can I grind “espresso beans” for my espresso machine?
A. Before final assembly we manually calibrate each pair of burr grinders (testing with beans!) to
prevent clogging while grinding, regardless of which type of beans you use. The actual grinding,
however, is designed well with drip coffee brewing. As a result, the grind may not be suitable for
your espresso machine
Q4. The grinder makes a loud noise, no coffee is processed?
A. A foreign object blocks the grinder. Contact SPRADA DIRECT: 0861 777 232
24
To Next Page
Loading...
