SPRADA filter manual changes 4/16/07 11:25 AM Page 21
Com
posite
C M Y CM MY CY CMY K
For cleaning, please follow this sequence:
• Make sure the Goldtone Filter or a filter paper is inserted in the filter holder insert.
• Move the filter holder underneath the grinder until it locks.
• Lift the Feeder Channel cover and set aside
(Fig. 12).
• Use the handle of the scoop to scrape out blocked coffee into the filter holder
(Fig 13).
• Wipe the inside with a dry, clean cloth.
• Push the manual release button
(Fig.14). The filter holder will swing back to the right.
• Wipe the inside of the feeder channel cover with a dry cloth (do not immerse in water).
• Replace the feeder channel cover.
• Empty the Goldtone Filter or filter paper.
14.0 DECALCIFYING:
As a guideline we recommend decalcifying at least every 6 months or whenever the brewing
process slows down. If brewing ten cups of water takes more than 10 minutes it is definitely time
to decalcify.
Attention:
• Before decalcifying, remove the Goldtone Filter.
• All decalcifying agents are acidic and must be handled carefully.
• Check the information on the packaging before use.
Caution: Never open the water container lid as long as the machine processes any liquid. Hot
water could spill out causing burns and injuries. Wait until all water is processed through the
machine or until the on/off button is no longer illuminated.
20
To Next Page
Loading...
