10
4. Adjusting the Basic Settings
i
Pressing the “>” Button again allows setting of the cup volume from 20ml
to 240ml according to the cup size.
Pressing the “>” Button again highlights 1x/2x and either one cup or two
cups can be made automatically.
If a milky coffee setting is being modified:
Pressing the “>” Button will allow the ratio of milk to coffee to be changed.
A higher percentage equals more coffee and less milk and a lower
percentage equals more milk and less coffee. The taste is preserved by
automatically changing this ratio if the cup size is changed.
Press the “Exit” key and the icon on the Main Menu flashes to indicate that
the new settings are being stored and all subsequent drinks will be made
using this setting.
Please note: If you start brewing your coffee inadvertently or too
early, you can actually change some parameters while the coffee is
being brewed. The parameter that you can change with the Rotary
Control Knob will flash in the bottom line of the Display Screen.
To Next Page
