Sprada FUTURE One Touch Cappuccino - 8 System Messages

26
8. System messages
8. System Messages
Message Meaning What to do
FILL-UP PIPE-SYSTEM Fill or rinse out water hoses (inside) Press the Rotary Control Knob
Fresh water Filter in use may be
faulty
Remove or change the Filter cartridge
FILL UP WATER Water Reservoir is empty Add fresh water
Water Reservoir is absent or incor-
rectly positioned
Correctly position Water Reservoir (see
point (2.3)
FILL UP BEANS Not enough coee beans Add beans to the container
(see point 2.3)
Coee beans do not fall into
Grinder (stuck)
Stir beans, e.g. with a
spoon,to loosen
Note: The message “FILL UP BEANS” only disappears when coee has been brewed after relling!
EMPTY TRAYS Drip Tray and / or used coee
tray are full
Empty Drip and / or used
Coee Tray
Contacts on back of Drip Tray
are not clean and / or dry
Clean / dry contacts
TRAYS MISSING Drip Tray and Coee Grounds
Container used are absent or not
correctly positioned
Position drip and coee
trays correctly
Contacts on back of Drip Tray
are not clean and / or dry
Clean / dry contacts
PLEASE CLEAN Cleaning programme is needed Clean machine
(see point 7.4)
PLEASE DESCALE Descaling programme is
needed
Descale the machine
(see point 7.5)
REPLACE FILTER Filter is no longer ecient Replace Filter
(see point 7.8)
BREWING UNIT REMOVED Brewing Unit is incorrectly
positioned / inserted
Check and insert/lock Brewing Unit
correctly
(see point 7.7)