Sprada FUTURE One Touch Cappuccino - 9 Troubleshooting

27
9. Troubleshooting
9. Troubleshooting
Fault Meaning What to do
No hot water / steam comes
out of jet
Milk Frother is blocked Disassemble and clean Milk Frother
thoroughly
Too little milk foam or foam
too liquid
The system may have a build-up of
lime scale
Please use a large dose of
descaler (see point 7.5)
Unsuitable milk Use cold milk
Milk Frother is blocked Disassemble and clean Milk Frother
thoroughly
Coee only comes out in
drips
The system may have a build-up of
lime scale
Please use a large dose of descaler (see
point 7.5)
Grinder setting is too ne Select coarser Grinder setting
Pre-ground coee is too ne Use coarser pre-ground coee
Coee without ‘crema’ The system may have a build-up of
lime scale
Please use a large dose of descaler (see
point 7.5)
Unsuitable coee type Change coee type
Grinder makes loud noise Beans no longer fresh Use fresh beans
Grinder settings not adjusted to
coee beans
Optimise Grinder settings
Other substances in Grinder, e.g.
little stones
Contact Customer Service, meanwhile
pre-ground coee can be used
If you are unable to correct a fault / system message yourself, call a SPRADA
Service Centre and please consult the Guaratee details in Section 13.
Caution: If the display reads “Error / Service-Tel”, note the code. Switch
o and unplug the machine and call a SPRADA Service Centre and
with the helpof the code, they will be able to suggest the best course
of action.
!