Sprint SLATE 10 - Bluetooth Settings

Settings 135
n
Check IP Address:FromWi-Fisettings,tap >Advanced.
l IPAddressappearsbelow“IPaddress.”
Bluetooth Settings
Yourtablet’sBluetooth
®
capabilitiesletyouusewirelessheadsets,sendandreceivepicturesand
files,andmore.Fordetailsonyourtablet’sBluetoothusage,seeBluetooth.
1.
Fromthehomescreen,tapApps >Settings .
2.
TapBluetooth .
TheBluetoothsettingsopen.
Bluetooth Settings Operations
n
Enable Bluetooth:InBluetoothsettings,taptheswitchtoOn toenableBluetooth.
l Whenenabled,confirmationappearsforyourtablettobediscoverablebyotherdevices.
Followtheonscreeninstructions.
l
SettheswitchtoOn toenableorOff todisable.
n Pairing Bluetooth Devices:Makesuretheotherdevicesaresettobediscovered.From
Bluetoothsettings,tapthedevicenamein“Availabledevices”andfollowtheonscreen
instructions.
l Dependingonthedevice,youmayberequiredtoenteroracceptapasskey.
l
Ifthetargetdevicedoesnotappear,tap >Refreshtosearchagain.
l ThissettingisavailablewhenBluetoothisenabled.